From: **** ********
<****@****.com>
Sent: Thursday, April 12, 2012
4:12 PM
To: Gabriel Topala (SIW)
Subject: Re: Feedback for SIW
Ah, I updated those codecs from http://www.free-codecs.com/djbcp_codec_pack_download.htm and now it works!
Many thanks Gabriel,
**** ********
On 12 April 2012 20:31, Gabriel Topala (SIW) <[email protected]> wrote:
The siw-debug.exe is automatically rebuild every 4 hours.
I’ve added the 78766964 codec on my internal “list of bad of codecs” and I’m skipping it.
1-25D0 184927: CodecList.cpp-129 CodecList::GetListFromVFW Skipping XVIDVFW.DLL
SIW is not using DirectShow, it uses VFW (VideoForWindows) interface.
Thanks,
Gabriel Topala
From: **** ********
[mailto:****@****.com]
Sent: Thursday, April 12, 2012 1:57 PM
To: Gabriel Topala (SIW)
Subject: Re: Feedback for SIW
Okay, I have re-installed xvid.
DXDiag now works, output attached.
The SIW Debug version you sent me works, attached.
My SIW (latest) still fails.
I really appreciate your help.
Regards,
**** ********
See my support page
On 12 April 2012 08:00, **** ******** <****@****.com> wrote:
Many thanks for tracking this, I'll do a little fiddling.
--
**** ********
Sent with Sparrow
On Thursday, 12 April 2012 at 04:26, Gabriel Topala (SIW) wrote:
The 78766964 codec is “DSH XVID DivX Decoder Filter”
It seems that something is wrong with your xvid drivers.
Thanks,
Gabriel Topala
From: **** ******** [mailto:****@****.com]
Sent: Wednesday, April 11, 2012 8:53 PM
To: Gabriel Topala (SIW)
Subject: Re: Feedback for SIW
The last number was 78766964
Regards,
**** ********
See my support pageOn 12 April 2012 01:28, Gabriel Topala (SIW) <[email protected]> wrote:
You have a bad driver.
Can you download again, please, https://www.gtopala.com/download/siw-debug/ and check the “Audio and Video Codecs”.
This version pops-up a dialog box with driver’s id (a hex value).
Please note the latest value before crash
Also, please send me the c:\siw_debug.txt file.
Thanks,
Gabriel Topala
From: **** ******** [mailto:****@****.com]
Sent: Wednesday, April 11, 2012 8:11 PM
To: Gabriel Topala (SIW)
Subject: Re: Feedback for SIW
Hmm, accessing Direct Show fails and causes the DXDiag tool to crash, it then asked to bypass Direct Show, I said yes and the info from that is attached.
Regards,
**** ********
See my support pageOn 11 April 2012 12:13, Gabriel Topala (SIW) <[email protected]> wrote:
Please run DXDiag, select “Save All Information” and send me the result.
Thanks,
Gabriel Topala
From: **** ******** [mailto:****@****.com]
Sent: Tuesday, April 10, 2012 6:40 PM
To: Gabriel Topala (SIW)
Subject: Re: Feedback for SIW
Thank you, dump attached. Crashes during audio/video drivers.
Regards,
**** ********
See my support pageOn 10 April 2012 23:04, Gabriel Topala (SIW) <[email protected]> wrote:
https://www.gtopala.com/download/siw-debug/
Please send me the c:\siw_debug.txt file.
Please check https://www.gtopala.com/forum/Thread-What-can-I-do-if-SIW-doesn-t-start-freezes-my-system-or-causes-a-blue-screen
Thanks,
Gabriel Topala
From: **** ******** [mailto:****@****.com]
Sent: Tuesday, April 10, 2012 5:26 PM
To: [email protected]
Subject: Feedback for SIW
SIW now crashes on my laptop. How can I obtain a dump to send you?
Regards,
**** ********
See my support page